10.(8 分)小明同学通过实验探究某一金属电阻的阻值 R 随温度 t 的变化关系.已知该金属电阻在常温下的阻值约10Ω,R随t的升高而增大.实验电路如图1所示,控温箱用以调节金属电阻的温值
实验时闭合S,先将开关K与1端闭合,调节金属电阻的温度,分别记下温度 $\mathrm { t } _ { 1 } , \ \mathrm { t } _ { 2 } , \ \cdots$ 和电流表的相应示数 $\mathrm { I } _ { 1 } , ~ \mathrm { I } _ { 2 } , ~ \cdots$ .然后将开关 K 与 2 端闭合,调节电阻箱使电流表的实数再次为 $\mathrm { I } _ { 1 } , ~ \mathrm { I } _ { 2 } , ~ \cdots$ ,分别记下电阻箱相应的示数 $\mathrm { R } _ { 1 } , ~ \mathrm { R } _ { 2 } , ~ \cdots$
图1
图2
(1)有以下两电流表,实验电路中应选用 A
(A)量程 0~100mA,内阻约 2Ω
(B)量程0~0.6A,内阻可忽略
(2)实验过程中,要将电阻箱的阻值由 9.9Ω 调节至 10.0Ω,需旋转图中电阻箱的旋钮“a”、“b”、“c”,正确的操作顺序是 ①②③
①将旋钮a由“0”旋转至“1”
②将旋钮b由“9”旋转至“0”
③将旋钮c由“9”旋转至“0”
(3)实验记录的t和R的数据见下表“
<table><tr><td rowspan=1 colspan=1>温度t(℃)</td><td rowspan=1 colspan=1>20.0</td><td rowspan=1 colspan=1>40.0</td><td rowspan=1 colspan=1>60.0</td><td rowspan=1 colspan=1>80.0</td><td rowspan=1 colspan=1>100.0</td></tr><tr><td rowspan=1 colspan=1>阻值R(Ω)</td><td rowspan=1 colspan=1>9.6</td><td rowspan=1 colspan=1>10.4</td><td rowspan=1 colspan=1>11.1</td><td rowspan=1 colspan=1>12.1</td><td rowspan=1 colspan=1>12.8</td></tr></table>
请根据表中数据,在图2作出R﹣t图象
由图线求得R随t的变化关系为R= R=0.04t+8.8
(1) A; (2) ①②; (3) (3)如图所示, $\mathtt { R = } 0 . 0 4 \mathrm { t } { + } 8 . 8$